General Information about Smart Tiles Panels
What is a Smart Tiles panel?
A decorative wall panel mimicking marble or stone. Rigid and durable, installed with construction adhesive. Available in 3 formats: Panel A (left of stove), Panel B (right of stove), Panel C (center behind stove). Panels align seamlessly for a...
What is a panel kit (A, B, C)?
Panel kits are designed to simplify installation. Each kit contains several panels identified by a letter (A, B, C), corresponding to a specific part of the design layout. By following the indicated order, you’ll achieve a harmonious and cohesive arr
Are the panels easy to install?
Yes! The panels are designed for easy installation with construction adhesive and a few basic tools. Just prepare the surface properly and follow the steps in the installation guide.
What surfaces can panels be installed on?
We recommend installing the panels on a smooth or slightly uneven surface. They can be applied to drywall or over existing tiles. Installation is not recommended on very uneven or bumpy surfaces.
How should I prepare the surface for panels?
Make sure the surface is clean, dry, and smooth. Use a powerful degreaser, like TSP (trisodium phosphate), to remove any dust, grease, or residue. If there is a silicone joint between the countertop and existing backsplash, remove it to ensure full c
What type of adhesive is recommended for panels?
We recommend using a construction adhesive, preferably water- or silicone-based (such as PVI). Always read and follow the manufacturer’s instructions carefully to ensure a safe and long-lasting installation.
Why do the panels arrive folded?
Panels are folded to facilitate shipping and reduce packaging, minimizing environmental impact. This folding does not affect the quality of the product.
How do I handle corners or angles with panels?
It’s normal for a small gap to remain at the back when installing a panel in a corner. If the fold aligns properly, you can bend the panel directly to fit the angle. While panel overlap is generally unnecessary, it's acceptable to slightly overlap on
Can the panels be cut?
Yes, the panels can be trimmed to the desired size. Place the panel face down and mark the cut line with a pencil on the back. Use a retractable utility knife with a cutting mat, and make several light passes (3 to 4) along the line until the cut is
How do I install panels around an electrical outlet?
Always cut power before beginning. Mark the location on the panel, cut carefully with a utility knife or hole saw, then install as usual. Replace the outlet cover once the panel is installed.
Are Smart Panels heat-, moisture-, and water-resistant?
Heat resistance. The panels are durable and designed to withstand heat from a stove. However, temperatures should not exceed 60 °C (140 °F). Flame resistance. The panels meet stringent international fire resistance standards:. · Classification B, s2,
How do I maintain the panels after installation?
To clean your panels, simply use a soft cloth with warm water and mild soap. Avoid abrasive products, harsh cleaners, or chemicals, as they may damage the surface.
Do I need a finishing step for panels?
Yes. To ensure a neat finish and protect against moisture infiltration, it’s recommended to apply a bead of latex sealant. If using white construction adhesive such as No More Nails or UniBond, it can also be used as a finishing joint for a seamless